Profile Dimension on Shop Drawings

[garrety]

Please show at least one profile dimension on the drawings.

for example:  Vistawall has a 3000 Series Multiplane, Center Set, 2" x 4-1/2" profile.

     Please include a dimension that indicates the  (2") part of the profile

Also, in the same regards there are systems that have more than one profile.

For example:  YKK YWW45 TU Front Set Window Wall System, Front Set,

     Horizontals and Verticals have a 2-1/4" Profile where the rest of the system has a 2" profile.


It would be nice to have some of these called out for on the shop drawings. 

[GDS-Staff]

This is a good point. We are a little concerned with smaller elevations getting cluttered with dimensions, but is we have enough people requesting this type of feature, we can certainly work it into the program.

[Wizard]

This can be done very easy in VB Cad, once you hit shop drawings then click on the tab of the drawing you would like to work with, then hit CAD.  Once in hit insert from file and add it to the drawing. It will take some work for you to find the right detail, every supplier dose different things. Once you have what you are looking for then hit preview, a just settings then print. After you have done this a few times it gets very easy.